投稿者アーカイブ: shang@celtec.cn

Elmendorf Tear Testerorf tear test? Introduction The Elmendorf tear test is a standardized method used to measure the tear resistance of materials such as paper, cardboard, textiles, and plastic films. This test evaluates the force required to propagate a tear once it has been initiated, providing critical data on the durability and performance of the material under stress. The test involves using an Elmendorf tear tester, which consists of a pendulum that tears the sample and measures the energy absorbed during the tearing process. The results are typically expressed in units of force, such as millinewtons or grams-force, and are essential for quality control and material specification in various industries. […]

Tack or stickiness is one of the most important properties of materials like pressure-sensitive adhesives that will allow the material to adhere to a surface, with slight pressure. If you are searching for one of the best testing equipment to measure the tack of adhesive then we suggest you go with rolling ball Tack Tester. This is one of the amazing testing equipment that measures the ability of adhesives that rapidly adhere to the other surface. Here in this blog, we are going to provide you with brief information about this amazing lab testing equipment and on what principle does it work. So, let us get started. A brief introduction about Rolling Ball Tack Tester […]

Labels are critical for all items, especially while delivering safety and electrical equipment to the customers. Because of the critical information included on the labels, it is essential that they should be sturdy and long-lasting. All labels are routinely subjected to an ink rub test to verify that they will withstand the test of time. Ink rub testing has several advantages, including improving product safety, ensuring conformity with international standards, and providing long-term product value. Here in this blog, we will discuss ink abrasion testing and how it is useful in testing the quality of packaging labels. So, let us get started! What is Ink Abrasion Testing? Surface coatings and printed materials can be damaged during […]

Description The Ink Rub Tester is used worldwide to determine the abrasion resistance of materials and printed materials.  Abrasion resistance is a desirable and sometimes critical property of materials printed materials as damage can occur during shipment, storage, handling and end use.  It is applicable to labels, folding cartons, corrugated boxes, inserts, circulars and other printed materials having applied graphics on a flat substrate as paper, board, corrugated board, plastic and aluminum film.  RAS-21 enables selection of speed, number of strokes and temperature of heated base plate. New magnetic clamping system ensures simple and safe fixation for test pieces on test sled and base. Plexiglass protection with safety interlock that interrupts movement […]

Introduction Maintaining the quality of beverage bottles is essential for consumer safety and satisfaction. The beverage bottle perpendicularity test is a critical quality control measure that ensures bottles meet the required standards. This article provides insights into this test and its alignment with ISO 9008 standards. Importance of the Beverage Bottle Perpendicularity Test Product Stability: Ensures bottles stand upright and do not tilt. Leak Prevention: Prevents leaks by ensuring proper alignment. Consumer Safety: Reduces the risk of accidents due to unstable bottles.   Understanding ISO 9008 What is ISO 9008? ISO 9008 is an international standard that outlines the requirements for quality management systems, focusing on packaging and container industries. It ensures that […]

How to Measure Melt Flow Index and Why is MFI Tester Important? Melt Flow Index (MFI) is a measure of the mass of a polymer that flows through a capillary, at a specified temperature and pressure, during a measured time period. Melt Flow Index is typically used to measure the Melt Flow Rate (MFR) of a polymer. Thus, Melt Flow Index, or MFI, is a standardized measure of the mass of a polymer that flows through a capillary during a set period of time. Melt Flow Index is a measure of the flow rate of a molten polymer and is commonly used to evaluate the quality of a polymer batch. […]

Leak Testing: A Guide Leak testing is a procedure that inspectors use to determine whether an object or system is functioning within a specific leak limit. Leaks occur when there is a defect—a hole, crack, or some other kind of flaw—in an object, allowing whatever the liquid or gas it is holding to flow out. Leak testing uses pressure to find these defects so that they can be addressed as part of regular maintenance procedures. In general, leak tests are performed on objects that are used to store or move liquids or gases. Leak testing is one of the most commonly used inspection methods. It falls into the category of non-destructive […]

The Power of Handheld Bottle Cap Torque Testers In the realm of product packaging, the integrity of bottle caps plays a crucial role in ensuring the freshness and quality of the contents within. Enter the handheld bottle cap torque tester, a compact yet powerful device that revolutionizes the way we assess and guarantee the reliability of bottle cap seals. In this exploration, we delve into the significant impact and precision offered by handheld bottle cap torque testers, shedding light on their role in packaging excellence. Precision in Every Twist: Understanding Handheld Torque Testers Handheld bottle cap torque testers are marvels of precision engineering, designed to measure the rotational force required to […]

Have you ever wondered how plastic products achieve their precise dimensions and consistent quality, despite the complex nature of the manufacturing process? The answer lies in a critical instrument known as the Melt Flow Tester, also know the Melt Flow Indexer or MFI Tester. The Melt Flow Index Tester serves as a vital tool in evaluating the melt flow rate (MFR) or melt volume-flow rate (MVR) of plastic materials under controlled conditions of temperature and pressure. By measuring the ease with which a molten plastic material flows through a standardized die, the melt flow tester provides invaluable insights into the material’s viscosity, flow behavior, and processability. This information is indispensable for every […]

What’s a softgel capsule hardness tester? Soft gelatin capsules need to undergo elasticity testing before packaging. This is where the tester is required, and not any ordinary tester. The manufacturers of the capsules need a reliablesoftgel capsule hardness testerto ensure that their products have passed the set industry-standard quality before they release the products to the consuming public. The result will indicate whether or not the capsule has the go-signal to be packed. This way, repeated failure during packaging, which could mean additional costs to the manufacturer, can be prevented. Gelomat aims to obtain the highest quality standards in testing gelatin capsules More about Soft Gel Capsules There are rules set regarding […]